head_banner

How does the steam generator burn canned petroleum liquefied gas to generate steam?

Steam generator is also called small steam boiler. According to different fuels, it can be divided into electric steam generator, biomass particle steam generator and gas steam generator. Let’s take a look at the gas steam generator together. Related Information.
The fuel of the small gas boiler is burned through the burner, and there is a water pipe 50cm below the combustion port. The water pipe is preheated by the heat absorbed, and the heat enters the furnace through the burner port. The exhaust port enters the fume hood to form double heating of the water inside and outside the furnace, and then the heat in the fume hood enters the energy-saving water tank integrated machine through the chimney. There is a U-shaped tube in the energy-saving water tank all-in-one machine. The water in the water tank absorbs heat through the U-shaped tube, and the water is heated to about 60~70 degrees. After passing through the water pump, it enters the furnace.
How to use a gas steam generator for a small oil-fired gas boiler without a natural gas pipeline. It is to burn liquefied petroleum gas, that is, our canned petroleum liquefied petroleum gas. This liquefied petroleum gas is converted by a gasifier. After conversion, after decompression, decompression for the first time, and decompression for the second time. Insert this burner for combustion. After connecting to the gas, connect to the electricity, 220V electricity is enough (the electricity is for the normal operation of the blower), and then connect to the water source. After the water source is connected, the steam generator reaches the normal water level, and then perform one-key operation.
Small oil-fired gas boilers start without manual supervision. The ignition is ignited, the blower runs and the burner starts. You can see the flames here. The pressure is a digital pressure gauge, which is already heating up to a pressure of one kilogram, 0.1 MPa. The pressure can be adjusted arbitrarily, because its saturation pressure is seven kilograms, and it can be set arbitrarily below seven kilograms. There will be a small white box on the device, which is the pressure controller, which is used for adjustment. If the pressure you set is 2~6kg, then during the operation of the steam generator, if the pressure reaches 6kg, the device will stop running, and when the pressure is lower than 2kg, the device will automatically start running.
All intelligent automation runs during use. Therefore, the use of small boilers does not require manual operation. It is not only energy-saving and environmentally friendly, but also saves labor to generate steam.


Post time: May-31-2023